Part analysis of automatic industrial washing and stripping machine

Compared with the double-cylinder industrial washing machine and the horizontal industrial washing machine, the more prominent advantage of the fully automatic industrial washing and extracting machine is that its functions are relatively comprehensive. It integrates washing and extracting. The conversion between washing and extracting only needs to set the program, and there is no need for human participation in the middle. Some fully automatic washing and extracting machines even have drying drums, stepless speed regulation, and automatic water temperature control systems, etc. It is convenient and fast, and its convenience is far higher than that of the horizontal washing machine. Although the horizontal washing machine has a single function, it is simple to maintain and has a low maintenance cost, which has been loved by a large number of customers. And the fully automatic washing machine has relatively more diverse functions, and the corresponding maintenance rate may also be relatively high, but it has complete functions and a relatively high market share.

Next, let's take a look at which parts of the fully automatic washing and extracting machine are prone to damage.

1. Computer control panel

This part is relatively prone to problems, mainly due to improper operation by personnel, non-standard use, and the quality of the computer board used by the manufacturer itself.

2. Sealing ring

The sealing rings are mainly concentrated in the seal at the bearing and the sealing strip at the all-steel gate. The sealing strip is made of silicone material and is a consumable. Generally, it needs to be replaced once every 2 years or so.

3. V-belt

The V-belt of the washing machine is connected to the variable frequency motor. Due to long-term full-load work, it will lead to relatively serious wear.

4. Bearing

The main shaft generally does not break, but there will be abnormal noises. If the damage is not serious, you can add grease. If the abnormal noise is too loud, you need to replace the bearing.

5. Computer chip

This part may be burned due to problems such as the voltage of the user.

6. Water pipe

Since the steam pipe has been in contact with water containing chemical substances for a long time, generally speaking, the water pipe and the steam hose will be damaged, and after a long time, there will be water leakage, and it should be replaced in time. Therefore, when choosing to buy washing equipment, it is necessary to choose a good brand. It is necessary to comprehensively consider from many aspects such as the brand, price, performance characteristics, and customer evaluation of the industrial washing machine. You cannot only look at the machine price. If the price is too low, there must be great defects. Shanghai Yasen Washing Equipment Co., Ltd. has been engaged in the production and sales of washing equipment for more than 30 years and is a truly reliable industrial washing machine sales manufacturer. You are welcome to call for business negotiation, and we will serve you wholeheartedly.